Adafruit PyPortal
The Adafruit PyPortal is a ARM board based on the Microchip ATSAMD51J20A family of SoC.
The PyPortal also has an Espressif ESP32 Wi-Fi coprocessor with TLS/SSL support built-in. PyPortal has a 3.2″ 320 x 240 color TFT with resistive touch screen. PyPortal includes: speaker, light sensor, temperature sensor, NeoPixel, microSD card slot, 8MB flash, plug-in ports for I2C and 2 analog/digital pins,
Interfaces
| Interface | Hardware Supported | TinyGo Support |
|---|---|---|
| GPIO | YES | YES |
| UART | YES | YES |
| SPI | YES | YES |
| I2C | YES | YES |
| ADC | YES | YES |
| PWM | YES | YES |
| USBDevice | YES | YES |
Pins
| Pin | Hardware pin | Alternative names | PWM |
|---|---|---|---|
D0 |
PB13 |
NINA_RX, UART_RX_PIN |
TCC3 (channel 1), TCC0 (channel 1) |
D1 |
PB12 |
NINA_TX, UART_TX_PIN |
TCC3 (channel 0), TCC0 (channel 0) |
D2 |
PB22 |
NEOPIXEL, WS2812 |
|
D3 |
PA04 |
A1 |
|
D4 |
PA05 |
A3 |
|
D5 |
PB16 |
NINA_ACK, NINA_CTS |
TCC3 (channel 0), TCC0 (channel 4) |
D6 |
PB15 |
NINA_GPIO0, NINA_RTS |
TCC4 (channel 1), TCC0 (channel 3) |
D7 |
PB17 |
NINA_RESETN |
TCC3 (channel 1), TCC0 (channel 5) |
D8 |
PB14 |
NINA_CS |
TCC4 (channel 0), TCC0 (channel 2) |
D9 |
PB04 |
TFT_RD |
|
D10 |
PB05 |
TFT_DC |
|
D11 |
PB06 |
TFT_CS |
|
D12 |
PB07 |
TFT_TE |
|
D13 |
PB23 |
LED |
|
D24 |
PA00 |
TFT_RESET |
|
D25 |
PB31 |
TFT_BACKLIGHT |
TCC4 (channel 1), TCC0 (channel 7) |
D26 |
PB09 |
TFT_WR |
|
D27 |
PB02 |
SDA_PIN |
TCC2 (channel 2) |
D28 |
PB03 |
SCL_PIN |
TCC2 (channel 3) |
D29 |
PA12 |
SPI0_SDO_PIN, NINA_SDO |
TCC0 (channel 6), TCC1 (channel 2) |
D30 |
PA13 |
SPI0_SCK_PIN, NINA_SCK |
TCC0 (channel 7), TCC1 (channel 3) |
D31 |
PA14 |
SPI0_SDI_PIN, NINA_SDI |
TCC2 (channel 0), TCC1 (channel 2) |
D32 |
PB30 |
TCC4 (channel 0), TCC0 (channel 6) |
|
D33 |
PA01 |
||
D34 |
PA16 |
LCD_DATA0 |
TCC1 (channel 0), TCC0 (channel 4) |
D35 |
PA17 |
TCC1 (channel 1), TCC0 (channel 5) |
|
D36 |
PA18 |
TCC1 (channel 2), TCC0 (channel 6) |
|
D37 |
PA19 |
TCC1 (channel 3), TCC0 (channel 7) |
|
D38 |
PA20 |
TCC1 (channel 4), TCC0 (channel 0) |
|
D39 |
PA21 |
TCC1 (channel 5), TCC0 (channel 1) |
|
D40 |
PA22 |
TCC1 (channel 6), TCC0 (channel 2) |
|
D41 |
PA23 |
TCC1 (channel 7), TCC0 (channel 3) |
|
D42 |
PB10 |
QSPI_SCK |
TCC0 (channel 4), TCC1 (channel 0) |
D43 |
PB11 |
QSPI_CS |
TCC0 (channel 5), TCC1 (channel 1) |
D44 |
PA08 |
QSPI_DATA0 |
TCC0 (channel 0), TCC1 (channel 4) |
D45 |
PA09 |
QSPI_DATA1 |
TCC0 (channel 1), TCC1 (channel 5) |
D46 |
PA10 |
QSPI_DATA2 |
TCC0 (channel 2), TCC1 (channel 6) |
D47 |
PA11 |
QSPI_DATA3 |
TCC0 (channel 3), TCC1 (channel 7) |
D50 |
PA02 |
SPK_SD, A0, AUDIO_OUT |
|
D51 |
PA15 |
TCC2 (channel 1), TCC1 (channel 3) |
|
A2 |
PA07 |
LIGHT |
|
A4 |
PB00 |
TOUCH_YD |
|
A5 |
PB01 |
TOUCH_XL |
|
A6 |
PA06 |
TOUCH_YU |
|
A7 |
PB08 |
TOUCH_XR |
|
USBCDC_DM_PIN |
PA24 |
TCC2 (channel 2) |
|
USBCDC_DP_PIN |
PA25 |
TCC2 (channel 3) |
Machine Package Docs
Documentation for the machine package for the Adafruit PyPortal
Flashing
UF2
The PyPortal comes with the UF2 bootloader already installed.
CLI Flashing
-
Plug your PyPortal into your computer’s USB port.
-
Flash your TinyGo program to the board using this command:
tinygo flash -target=pyportal [PATH TO YOUR PROGRAM] -
The PyPortal board should restart and then begin running your program.
Troubleshooting
If you have troubles getting your PyPortal board to receive code, try this:
- Press the “RESET” button on the board two times to get the PyPortal board ready to receive code.
- The PyPortal board will appear to your computer like a USB drive.
- Now try running the command as above:
tinygo flash -target=pyportal [PATH TO YOUR PROGRAM]
Once you have updated your PyPortal board the first time, after that you should be able to flash it entirely from the command line.
Notes
You can use the USB port to the PyPortal as a serial port. UART0 refers to this connection.