ST Micro "Nucleo" L031K6
The STM32 Nucleo L031K6 is an ARM development board based on the ST Micro STM32L031K6 SoC.
It has 2 user buttons, and 3 user LEDs.
Interfaces
| Interface | Hardware Supported | TinyGo Support |
|---|---|---|
| GPIO | YES | YES |
| UART | YES | YES |
| SPI | YES | YES |
| I2C | YES | YES |
| ADC | YES | Not yet |
| PWM | YES | Not yet |
| USBDevice | NO | NO |
Pins
| Pin | Hardware pin | Alternative names |
|---|---|---|
A0 |
PA0 |
BUTTON |
A1 |
PA1 |
|
A2 |
PA3 |
|
A3 |
PA4 |
|
A4 |
PA5 |
|
A5 |
PA6 |
|
A6 |
PA7 |
|
A7 |
PA2 |
UART_TX_PIN |
D0 |
PA10 |
|
D1 |
PA9 |
|
D2 |
PA12 |
|
D3 |
PB0 |
|
D4 |
PB7 |
I2C0_SCL_PIN |
D5 |
PB6 |
I2C0_SDA_PIN |
D6 |
PB1 |
|
D9 |
PA8 |
|
D10 |
PA11 |
|
D11 |
PB5 |
SPI1_SDI_PIN, SPI0_SDI_PIN |
D12 |
PB4 |
SPI1_SDO_PIN, SPI0_SDO_PIN |
D13 |
PB3 |
LED, LED_BUILTIN, LED_GREEN, SPI1_SCK_PIN, SPI0_SCK_PIN |
UART_RX_PIN |
PA15 |
Machine Package Docs
Documentation for the machine package for the STM32 Nucleo L031K6
Flashing
OpenOCD
Programs are loaded onto the STM32 Nucleo L031K6 with the onboard STLink v2 hardware programmer, using the openocd command line utility program to perform the board flashing. You must install OpenOCD before you will be able to flash the STM32 Nucleo L031K6 board with your TinyGo code.
- Plug your STM32 Nucleo L031K6 into your computer’s USB port.
- Build and flash your TinyGo program using
tinygo flash -target=nucleo-l031k6