teensy40
Constants
const (
// = Pin // [Pad]: Alt Func 0 Alt Func 1 Alt Func 2 Alt Func 3 Alt Func 4 Alt Func 5 Alt Func 6 Alt Func 7 Alt Func 8 Alt Func 9
// = ---- ----------- --------------- --------------- --------------- -------------- -------------------- ---------- -------------------- --------------------- --------------------- ----------------
D0 = PA3 // [AD_B0_03]: FLEXCAN2_RX XBAR1_INOUT17 LPUART6_RX USB_OTG1_OC FLEXPWM1_PWMX01 GPIO1_IO03 REF_CLK_24M LPSPI3_PCS0 ~ ~
D1 = PA2 // [AD_B0_02]: FLEXCAN2_TX XBAR1_INOUT16 LPUART6_TX USB_OTG1_PWR FLEXPWM1_PWMX00 GPIO1_IO02 LPI2C1_HREQ LPSPI3_SDI ~ ~
D2 = PD4 // [EMC_04]: SEMC_DATA04 FLEXPWM4_PWMA02 SAI2_TX_DATA XBAR1_INOUT06 FLEXIO1_FLEXIO04 GPIO4_IO04 ~ ~ ~ ~
D3 = PD5 // [EMC_05]: SEMC_DATA05 FLEXPWM4_PWMB02 SAI2_TX_SYNC XBAR1_INOUT07 FLEXIO1_FLEXIO05 GPIO4_IO05 ~ ~ ~ ~
D4 = PD6 // [EMC_06]: SEMC_DATA06 FLEXPWM2_PWMA00 SAI2_TX_BCLK XBAR1_INOUT08 FLEXIO1_FLEXIO06 GPIO4_IO06 ~ ~ ~ ~
D5 = PD8 // [EMC_08]: SEMC_DM00 FLEXPWM2_PWMA01 SAI2_RX_DATA XBAR1_INOUT17 FLEXIO1_FLEXIO08 GPIO4_IO08 ~ ~ ~ ~
D6 = PB10 // [B0_10]: LCD_DATA06 QTIMER4_TIMER1 FLEXPWM2_PWMA02 SAI1_TX_DATA03 FLEXIO2_FLEXIO10 GPIO2_IO10 SRC_BOOT_CFG06 ENET2_CRS ~ ~
D7 = PB17 // [B1_01]: LCD_DATA13 XBAR1_INOUT15 LPUART4_RX SAI1_TX_DATA00 FLEXIO2_FLEXIO17 GPIO2_IO17 FLEXPWM1_PWMB03 ENET2_RDATA00 FLEXIO3_FLEXIO17 ~
D8 = PB16 // [B1_00]: LCD_DATA12 XBAR1_INOUT14 LPUART4_TX SAI1_RX_DATA00 FLEXIO2_FLEXIO16 GPIO2_IO16 FLEXPWM1_PWMA03 ENET2_RX_ER FLEXIO3_FLEXIO16 ~
D9 = PB11 // [B0_11]: LCD_DATA07 QTIMER4_TIMER2 FLEXPWM2_PWMB02 SAI1_TX_DATA02 FLEXIO2_FLEXIO11 GPIO2_IO11 SRC_BOOT_CFG07 ENET2_COL ~ ~
D10 = PB0 // [B0_00]: LCD_CLK QTIMER1_TIMER0 MQS_RIGHT LPSPI4_PCS0 FLEXIO2_FLEXIO00 GPIO2_IO00 SEMC_CSX01 ENET2_MDC ~ ~
D11 = PB2 // [B0_02]: LCD_HSYNC QTIMER1_TIMER2 FLEXCAN1_TX LPSPI4_SDO FLEXIO2_FLEXIO02 GPIO2_IO02 SEMC_CSX03 ENET2_1588_EVENT0_OUT ~ ~
D12 = PB1 // [B0_01]: LCD_ENABLE QTIMER1_TIMER1 MQS_LEFT LPSPI4_SDI FLEXIO2_FLEXIO01 GPIO2_IO01 SEMC_CSX02 ENET2_MDIO ~ ~
D13 = PB3 // [B0_03]: LCD_VSYNC QTIMER2_TIMER0 FLEXCAN1_RX LPSPI4_SCK FLEXIO2_FLEXIO03 GPIO2_IO03 WDOG2_RESET_B_DEB ENET2_1588_EVENT0_IN ~ ~
D14 = PA18 // [AD_B1_02]: USB_OTG1_ID QTIMER3_TIMER2 LPUART2_TX SPDIF_OUT ENET_1588_EVENT2_OUT GPIO1_IO18 USDHC1_CD_B KPP_ROW06 GPT2_CLK FLEXIO3_FLEXIO02
D15 = PA19 // [AD_B1_03]: USB_OTG1_OC QTIMER3_TIMER3 LPUART2_RX SPDIF_IN ENET_1588_EVENT2_IN GPIO1_IO19 USDHC2_CD_B KPP_COL06 GPT2_CAPTURE1 FLEXIO3_FLEXIO03
D16 = PA23 // [AD_B1_07]: FLEXSPIB_DATA00 LPI2C3_SCL LPUART3_RX SPDIF_EXT_CLK CSI_HSYNC GPIO1_IO23 USDHC2_DATA3 KPP_COL04 GPT2_COMPARE3 FLEXIO3_FLEXIO07
D17 = PA22 // [AD_B1_06]: FLEXSPIB_DATA01 LPI2C3_SDA LPUART3_TX SPDIF_LOCK CSI_VSYNC GPIO1_IO22 USDHC2_DATA2 KPP_ROW04 GPT2_COMPARE2 FLEXIO3_FLEXIO06
D18 = PA17 // [AD_B1_01]: USB_OTG1_PWR QTIMER3_TIMER1 LPUART2_RTS_B LPI2C1_SDA CCM_PMIC_READY GPIO1_IO17 USDHC1_VSELECT KPP_COL07 ENET2_1588_EVENT0_IN FLEXIO3_FLEXIO01
D19 = PA16 // [AD_B1_00]: USB_OTG2_ID QTIMER3_TIMER0 LPUART2_CTS_B LPI2C1_SCL WDOG1_B GPIO1_IO16 USDHC1_WP KPP_ROW07 ENET2_1588_EVENT0_OUT FLEXIO3_FLEXIO00
D20 = PA26 // [AD_B1_10]: FLEXSPIA_DATA03 WDOG1_B LPUART8_TX SAI1_RX_SYNC CSI_DATA07 GPIO1_IO26 USDHC2_WP KPP_ROW02 ENET2_1588_EVENT1_OUT FLEXIO3_FLEXIO10
D21 = PA27 // [AD_B1_11]: FLEXSPIA_DATA02 EWM_OUT_B LPUART8_RX SAI1_RX_BCLK CSI_DATA06 GPIO1_IO27 USDHC2_RESET_B KPP_COL02 ENET2_1588_EVENT1_IN FLEXIO3_FLEXIO11
D22 = PA24 // [AD_B1_08]: FLEXSPIA_SS1_B FLEXPWM4_PWMA00 FLEXCAN1_TX CCM_PMIC_READY CSI_DATA09 GPIO1_IO24 USDHC2_CMD KPP_ROW03 FLEXIO3_FLEXIO08 ~
D23 = PA25 // [AD_B1_09]: FLEXSPIA_DQS FLEXPWM4_PWMA01 FLEXCAN1_RX SAI1_MCLK CSI_DATA08 GPIO1_IO25 USDHC2_CLK KPP_COL03 FLEXIO3_FLEXIO09 ~
D24 = PA12 // [AD_B0_12]: LPI2C4_SCL CCM_PMIC_READY LPUART1_TX WDOG2_WDOG_B FLEXPWM1_PWMX02 GPIO1_IO12 ENET_1588_EVENT1_OUT NMI_GLUE_NMI ~ ~
D25 = PA13 // [AD_B0_13]: LPI2C4_SDA GPT1_CLK LPUART1_RX EWM_OUT_B FLEXPWM1_PWMX03 GPIO1_IO13 ENET_1588_EVENT1_IN REF_CLK_24M ~ ~
D26 = PA30 // [AD_B1_14]: FLEXSPIA_SCLK ACMP_OUT02 LPSPI3_SDO SAI1_TX_BCLK CSI_DATA03 GPIO1_IO30 USDHC2_DATA6 KPP_ROW00 ENET2_1588_EVENT3_OUT FLEXIO3_FLEXIO14
D27 = PA31 // [AD_B1_15]: FLEXSPIA_SS0_B ACMP_OUT03 LPSPI3_SCK SAI1_TX_SYNC CSI_DATA02 GPIO1_IO31 USDHC2_DATA7 KPP_COL00 ENET2_1588_EVENT3_IN FLEXIO3_FLEXIO15
D28 = PC18 // [EMC_32]: SEMC_DATA10 FLEXPWM3_PWMB01 LPUART7_RX CCM_PMIC_RDY CSI_DATA21 GPIO3_IO18 ENET2_TX_EN ~ ~ ~
D29 = PD31 // [EMC_31]: SEMC_DATA09 FLEXPWM3_PWMA01 LPUART7_TX LPSPI1_PCS1 CSI_DATA22 GPIO4_IO31 ENET2_TDATA01 ~ ~ ~
D30 = PC23 // [EMC_37]: SEMC_DATA15 XBAR1_IN23 GPT1_COMPARE3 SAI3_MCLK CSI_DATA16 GPIO3_IO23 USDHC2_WP ENET2_RX_EN FLEXCAN3_RX ~
D31 = PC22 // [EMC_36]: SEMC_DATA14 XBAR1_IN22 GPT1_COMPARE2 SAI3_TX_DATA CSI_DATA17 GPIO3_IO22 USDHC1_WP ENET2_RDATA01 FLEXCAN3_TX ~
D32 = PB12 // [B0_12]: LCD_DATA08 XBAR1_INOUT10 ARM_TRACE_CLK SAI1_TX_DATA01 FLEXIO2_FLEXIO12 GPIO2_IO12 SRC_BOOT_CFG08 ENET2_TDATA00 ~ ~
D33 = PD7 // [EMC_07]: SEMC_DATA07 FLEXPWM2_PWMB00 SAI2_MCLK XBAR1_INOUT09 FLEXIO1_FLEXIO07 GPIO4_IO07 ~ ~ ~ ~
D34 = PC15 // [SD_B0_03]: USDHC1_DATA1 FLEXPWM1_PWMB01 LPUART8_RTS_B XBAR1_INOUT07 LPSPI1_SDI GPIO3_IO15 ENET2_RDATA00 SEMC_CLK6 ~ ~
D35 = PC14 // [SD_B0_02]: USDHC1_DATA0 FLEXPWM1_PWMA01 LPUART8_CTS_B XBAR1_INOUT06 LPSPI1_SDO GPIO3_IO14 ENET2_RX_ER SEMC_CLK5 ~ ~
D36 = PC13 // [SD_B0_01]: USDHC1_CLK FLEXPWM1_PWMB00 LPI2C3_SDA XBAR1_INOUT05 LPSPI1_PCS0 GPIO3_IO13 FLEXSPIB_SS1_B ENET2_TX_CLK ENET2_REF_CLK2 ~
D37 = PC12 // [SD_B0_00]: USDHC1_CMD FLEXPWM1_PWMA00 LPI2C3_SCL XBAR1_INOUT04 LPSPI1_SCK GPIO3_IO12 FLEXSPIA_SS1_B ENET2_TX_EN SEMC_DQS4 ~
D38 = PC17 // [SD_B0_05]: USDHC1_DATA3 FLEXPWM1_PWMB02 LPUART8_RX XBAR1_INOUT09 FLEXSPIB_DQS GPIO3_IO17 CCM_CLKO2 ENET2_RX_EN ~ ~
D39 = PC16 // [SD_B0_04]: USDHC1_DATA2 FLEXPWM1_PWMA02 LPUART8_TX XBAR1_INOUT08 FLEXSPIB_SS0_B GPIO3_IO16 CCM_CLKO1 ENET2_RDATA01 ~ ~
)
Digital pins
const (
// = Pin // Dig | [Pad] {ADC1/ADC2}
A0 = PA18 // D14 | [AD_B1_02] { 7 / 7 }
A1 = PA19 // D15 | [AD_B1_03] { 8 / 8 }
A2 = PA23 // D16 | [AD_B1_07] { 12 / 12 }
A3 = PA22 // D17 | [AD_B1_06] { 11 / 11 }
A4 = PA17 // D18 | [AD_B1_01] { 6 / 6 }
A5 = PA16 // D19 | [AD_B1_00] { 5 / 5 }
A6 = PA26 // D20 | [AD_B1_10] { 15 / 15 }
A7 = PA27 // D21 | [AD_B1_11] { 0 / 0 }
A8 = PA24 // D22 | [AD_B1_08] { 13 / 13 }
A9 = PA25 // D23 | [AD_B1_09] { 14 / 14 }
A10 = PA12 // D24 | [AD_B0_12] { 1 / - }
A11 = PA13 // D25 | [AD_B0_13] { 2 / - }
A12 = PA30 // D26 | [AD_B1_14] { - / 3 }
A13 = PA31 // D27 | [AD_B1_15] { - / 4 }
)
Analog pins
const (
LED = D13
UART_RX_PIN = UART1_RX_PIN // D0
UART_TX_PIN = UART1_TX_PIN // D1
SPI_SDI_PIN = SPI1_SDI_PIN // D12
SPI_SDO_PIN = SPI1_SDO_PIN // D11
SPI_SCK_PIN = SPI1_SCK_PIN // D13
SPI_CS_PIN = SPI1_CS_PIN // D10
I2C_SDA_PIN = I2C1_SDA_PIN // D18/A4
I2C_SCL_PIN = I2C1_SCL_PIN // D19/A5
)
Default peripheral pins
const (
UART1_RX_PIN = D0
UART1_TX_PIN = D1
UART2_RX_PIN = D7
UART2_TX_PIN = D8
UART3_RX_PIN = D15
UART3_TX_PIN = D14
UART4_RX_PIN = D16
UART4_TX_PIN = D17
UART5_RX_PIN = D21
UART5_TX_PIN = D20
UART6_RX_PIN = D25
UART6_TX_PIN = D24
UART7_RX_PIN = D28
UART7_TX_PIN = D29
)
#=====================================================# | UART | #===========#===========#=============#===============# | Interface | Hardware | Clock(Freq) | RX/TX : Alt | #===========#===========#=============#=========-=====# | UART1 | LPUART6 | OSC(24 MHz) | D0/D1 : 2/2 | | UART2 | LPUART4 | OSC(24 MHz) | D7/D8 : 2/2 | | UART3 | LPUART2 | OSC(24 MHz) | D15/D14 : 2/2 | | UART4 | LPUART3 | OSC(24 MHz) | D16/D17 : 2/2 | | UART5 | LPUART8 | OSC(24 MHz) | D21/D20 : 2/2 | | UART6 | LPUART1 | OSC(24 MHz) | D25/D24 : 2/2 | | UART7 | LPUART7 | OSC(24 MHz) | D28/D29 : 2/2 | #===========#===========#=============#=========-=====#
const (
SPI1_SDI_PIN = D12
SPI1_SDO_PIN = D11
SPI1_SCK_PIN = D13
SPI1_CS_PIN = D10
SPI2_SDI_PIN = D1
SPI2_SDO_PIN = D26
SPI2_SCK_PIN = D27
SPI2_CS_PIN = D0
SPI3_SDI_PIN = D34
SPI3_SDO_PIN = D35
SPI3_SCK_PIN = D37
SPI3_CS_PIN = D36
)
#==================================================================# | SPI | #===========#==========#===============#===========================# | Interface | Hardware | Clock(Freq) | SDI/SDO/SCK/CS : Alt | #===========#==========#===============#=================-=========# | SPI1 | LPSPI4 | PLL2(132 MHz) | D12/D11/D13/D10 : 3/3/3/3 | | SPI2 | LPSPI3 | PLL2(132 MHz) | D1/D26/D27/D0 : 7/2/2/7 | | SPI3 | LPSPI1 | PLL2(132 MHz) | D34/D35/D37/D36 : 4/4/4/4 | #===========#==========#===============#=================-=========#
const (
I2C1_SDA_PIN = D18
I2C1_SCL_PIN = D19
I2C2_SDA_PIN = D17
I2C2_SCL_PIN = D16
I2C3_SDA_PIN = D25
I2C3_SCL_PIN = D24
)
#====================================================# | I2C | #===========#==========#=============#===============# | Interface | Hardware | Clock(Freq) | SDA/SCL : Alt | #===========#==========#=============#=========-=====# | I2C1 | LPI2C1 | OSC(24 MHz) | D18/D19 : 3/3 | | I2C2 | LPI2C3 | OSC(24 MHz) | D17/D16 : 1/1 | | I2C3 | LPI2C4 | OSC(24 MHz) | D25/D24 : 0/0 | #===========#==========#=============#=========-=====#
const (
TWI_FREQ_100KHZ = 100000
TWI_FREQ_400KHZ = 400000
)
TWI_FREQ is the I2C bus speed. Normally either 100 kHz, or 400 kHz for high-speed bus.
Deprecated: use 100 * machine.KHz or 400 * machine.KHz instead.
const (
// I2CReceive indicates target has received a message from the controller.
I2CReceive I2CTargetEvent = iota
// I2CRequest indicates the controller is expecting a message from the target.
I2CRequest
// I2CFinish indicates the controller has ended the transaction.
//
// I2C controllers can chain multiple receive/request messages without
// relinquishing the bus by doing 'restarts'. I2CFinish indicates the
// bus has been relinquished by an I2C 'stop'.
I2CFinish
)
const (
// I2CModeController represents an I2C peripheral in controller mode.
I2CModeController I2CMode = iota
// I2CModeTarget represents an I2C peripheral in target mode.
I2CModeTarget
)
const Device = deviceName
Device is the running program’s chip name, such as “ATSAMD51J19A” or “nrf52840”. It is not the same as the CPU name.
The constant is some hardcoded default value if the program does not target a particular chip but instead runs in WebAssembly for example.
const (
KHz = 1000
MHz = 1000_000
GHz = 1000_000_000
)
Generic constants.
const NoPin = Pin(0xff)
NoPin explicitly indicates “not a pin”. Use this pin if you want to leave one of the pins in a peripheral unconfigured (if supported by the hardware).
const (
// GPIO
PinInput PinMode = iota
PinInputPullup
PinInputPulldown
PinOutput
PinOutputOpenDrain
PinDisable
// ADC
PinInputAnalog
// UART
PinModeUARTTX
PinModeUARTRX
// SPI
PinModeSPISDI
PinModeSPISDO
PinModeSPICLK
PinModeSPICS
// I2C
PinModeI2CSDA
PinModeI2CSCL
)
const (
PinInputPullUp = PinInputPullup
PinInputPullDown = PinInputPulldown
)
Deprecated: use PinInputPullup and PinInputPulldown instead.
const (
PinRising PinChange = iota + 2
PinFalling
PinToggle
)
const (
// [Pad]: Alt Func 0 Alt Func 1 Alt Func 2 Alt Func 3 Alt Func 4 Alt Func 5 Alt Func 6 Alt Func 7 Alt Func 8 Alt Func 9
// ---------- --------------- --------------- ------------------- -------------------- -------------------- ----------- -------------------- -------------------- --------------------- ----------------
PA0 = portA + 0 // [AD_B0_00]: FLEXPWM2_PWMA03 XBAR1_INOUT14 REF_CLK_32K USB_OTG2_ID LPI2C1_SCLS GPIO1_IO00 USDHC1_RESET_B LPSPI3_SCK ~ ~
PA1 = portA + 1 // [AD_B0_01]: FLEXPWM2_PWMB03 XBAR1_INOUT15 REF_CLK_24M USB_OTG1_ID LPI2C1_SDAS GPIO1_IO01 EWM_OUT_B LPSPI3_SDO ~ ~
PA2 = portA + 2 // [AD_B0_02]: FLEXCAN2_TX XBAR1_INOUT16 LPUART6_TX USB_OTG1_PWR FLEXPWM1_PWMX00 GPIO1_IO02 LPI2C1_HREQ LPSPI3_SDI ~ ~
PA3 = portA + 3 // [AD_B0_03]: FLEXCAN2_RX XBAR1_INOUT17 LPUART6_RX USB_OTG1_OC FLEXPWM1_PWMX01 GPIO1_IO03 REF_CLK_24M LPSPI3_PCS0 ~ ~
PA4 = portA + 4 // [AD_B0_04]: SRC_BOOT_MODE00 MQS_RIGHT ENET_TX_DATA03 SAI2_TX_SYNC CSI_DATA09 GPIO1_IO04 PIT_TRIGGER00 LPSPI3_PCS1 ~ ~
PA5 = portA + 5 // [AD_B0_05]: SRC_BOOT_MODE01 MQS_LEFT ENET_TX_DATA02 SAI2_TX_BCLK CSI_DATA08 GPIO1_IO05 XBAR1_INOUT17 LPSPI3_PCS2 ~ ~
PA6 = portA + 6 // [AD_B0_06]: JTAG_TMS GPT2_COMPARE1 ENET_RX_CLK SAI2_RX_BCLK CSI_DATA07 GPIO1_IO06 XBAR1_INOUT18 LPSPI3_PCS3 ~ ~
PA7 = portA + 7 // [AD_B0_07]: JTAG_TCK GPT2_COMPARE2 ENET_TX_ER SAI2_RX_SYNC CSI_DATA06 GPIO1_IO07 XBAR1_INOUT19 ENET_1588_EVENT3_OUT ~ ~
PA8 = portA + 8 // [AD_B0_08]: JTAG_MOD GPT2_COMPARE3 ENET_RX_DATA03 SAI2_RX_DATA CSI_DATA05 GPIO1_IO08 XBAR1_IN20 ENET_1588_EVENT3_IN ~ ~
PA9 = portA + 9 // [AD_B0_09]: JTAG_TDI FLEXPWM2_PWMA03 ENET_RX_DATA02 SAI2_TX_DATA CSI_DATA04 GPIO1_IO09 XBAR1_IN21 GPT2_CLK SEMC_DQS4 ~
PA10 = portA + 10 // [AD_B0_10]: JTAG_TDO FLEXPWM1_PWMA03 ENET_CRS SAI2_MCLK CSI_DATA03 GPIO1_IO10 XBAR1_IN22 ENET_1588_EVENT0_OUT FLEXCAN3_TX ARM_TRACE_SWO
PA11 = portA + 11 // [AD_B0_11]: JTAG_TRSTB FLEXPWM1_PWMB03 ENET_COL WDOG1_WDOG_B CSI_DATA02 GPIO1_IO11 XBAR1_IN23 ENET_1588_EVENT0_IN FLEXCAN3_RX SEMC_CLK6
PA12 = portA + 12 // [AD_B0_12]: LPI2C4_SCL CCM_PMIC_READY LPUART1_TX WDOG2_WDOG_B FLEXPWM1_PWMX02 GPIO1_IO12 ENET_1588_EVENT1_OUT NMI_GLUE_NMI ~ ~
PA13 = portA + 13 // [AD_B0_13]: LPI2C4_SDA GPT1_CLK LPUART1_RX EWM_OUT_B FLEXPWM1_PWMX03 GPIO1_IO13 ENET_1588_EVENT1_IN REF_CLK_24M ~ ~
PA14 = portA + 14 // [AD_B0_14]: USB_OTG2_OC XBAR1_IN24 LPUART1_CTS_B ENET_1588_EVENT0_OUT CSI_VSYNC GPIO1_IO14 FLEXCAN2_TX FLEXCAN3_TX ~ ~
PA15 = portA + 15 // [AD_B0_15]: USB_OTG2_PWR XBAR1_IN25 LPUART1_RTS_B ENET_1588_EVENT0_IN CSI_HSYNC GPIO1_IO15 FLEXCAN2_RX WDOG1_WDOG_RST_B_DEB FLEXCAN3_RX ~
PA16 = portA + 16 // [AD_B1_00]: USB_OTG2_ID QTIMER3_TIMER0 LPUART2_CTS_B LPI2C1_SCL WDOG1_B GPIO1_IO16 USDHC1_WP KPP_ROW07 ENET2_1588_EVENT0_OUT FLEXIO3_FLEXIO00
PA17 = portA + 17 // [AD_B1_01]: USB_OTG1_PWR QTIMER3_TIMER1 LPUART2_RTS_B LPI2C1_SDA CCM_PMIC_READY GPIO1_IO17 USDHC1_VSELECT KPP_COL07 ENET2_1588_EVENT0_IN FLEXIO3_FLEXIO01
PA18 = portA + 18 // [AD_B1_02]: USB_OTG1_ID QTIMER3_TIMER2 LPUART2_TX SPDIF_OUT ENET_1588_EVENT2_OUT GPIO1_IO18 USDHC1_CD_B KPP_ROW06 GPT2_CLK FLEXIO3_FLEXIO02
PA19 = portA + 19 // [AD_B1_03]: USB_OTG1_OC QTIMER3_TIMER3 LPUART2_RX SPDIF_IN ENET_1588_EVENT2_IN GPIO1_IO19 USDHC2_CD_B KPP_COL06 GPT2_CAPTURE1 FLEXIO3_FLEXIO03
PA20 = portA + 20 // [AD_B1_04]: FLEXSPIB_DATA03 ENET_MDC LPUART3_CTS_B SPDIF_SR_CLK CSI_PIXCLK GPIO1_IO20 USDHC2_DATA0 KPP_ROW05 GPT2_CAPTURE2 FLEXIO3_FLEXIO04
PA21 = portA + 21 // [AD_B1_05]: FLEXSPIB_DATA02 ENET_MDIO LPUART3_RTS_B SPDIF_OUT CSI_MCLK GPIO1_IO21 USDHC2_DATA1 KPP_COL05 GPT2_COMPARE1 FLEXIO3_FLEXIO05
PA22 = portA + 22 // [AD_B1_06]: FLEXSPIB_DATA01 LPI2C3_SDA LPUART3_TX SPDIF_LOCK CSI_VSYNC GPIO1_IO22 USDHC2_DATA2 KPP_ROW04 GPT2_COMPARE2 FLEXIO3_FLEXIO06
PA23 = portA + 23 // [AD_B1_07]: FLEXSPIB_DATA00 LPI2C3_SCL LPUART3_RX SPDIF_EXT_CLK CSI_HSYNC GPIO1_IO23 USDHC2_DATA3 KPP_COL04 GPT2_COMPARE3 FLEXIO3_FLEXIO07
PA24 = portA + 24 // [AD_B1_08]: FLEXSPIA_SS1_B FLEXPWM4_PWMA00 FLEXCAN1_TX CCM_PMIC_READY CSI_DATA09 GPIO1_IO24 USDHC2_CMD KPP_ROW03 FLEXIO3_FLEXIO08 ~
PA25 = portA + 25 // [AD_B1_09]: FLEXSPIA_DQS FLEXPWM4_PWMA01 FLEXCAN1_RX SAI1_MCLK CSI_DATA08 GPIO1_IO25 USDHC2_CLK KPP_COL03 FLEXIO3_FLEXIO09 ~
PA26 = portA + 26 // [AD_B1_10]: FLEXSPIA_DATA03 WDOG1_B LPUART8_TX SAI1_RX_SYNC CSI_DATA07 GPIO1_IO26 USDHC2_WP KPP_ROW02 ENET2_1588_EVENT1_OUT FLEXIO3_FLEXIO10
PA27 = portA + 27 // [AD_B1_11]: FLEXSPIA_DATA02 EWM_OUT_B LPUART8_RX SAI1_RX_BCLK CSI_DATA06 GPIO1_IO27 USDHC2_RESET_B KPP_COL02 ENET2_1588_EVENT1_IN FLEXIO3_FLEXIO11
PA28 = portA + 28 // [AD_B1_12]: FLEXSPIA_DATA01 ACMP_OUT00 LPSPI3_PCS0 SAI1_RX_DATA00 CSI_DATA05 GPIO1_IO28 USDHC2_DATA4 KPP_ROW01 ENET2_1588_EVENT2_OUT FLEXIO3_FLEXIO12
PA29 = portA + 29 // [AD_B1_13]: FLEXSPIA_DATA00 ACMP_OUT01 LPSPI3_SDI SAI1_TX_DATA00 CSI_DATA04 GPIO1_IO29 USDHC2_DATA5 KPP_COL01 ENET2_1588_EVENT2_IN FLEXIO3_FLEXIO13
PA30 = portA + 30 // [AD_B1_14]: FLEXSPIA_SCLK ACMP_OUT02 LPSPI3_SDO SAI1_TX_BCLK CSI_DATA03 GPIO1_IO30 USDHC2_DATA6 KPP_ROW00 ENET2_1588_EVENT3_OUT FLEXIO3_FLEXIO14
PA31 = portA + 31 // [AD_B1_15]: FLEXSPIA_SS0_B ACMP_OUT03 LPSPI3_SCK SAI1_TX_SYNC CSI_DATA02 GPIO1_IO31 USDHC2_DATA7 KPP_COL00 ENET2_1588_EVENT3_IN FLEXIO3_FLEXIO15
PB0 = portB + 0 // [B0_00]: LCD_CLK QTIMER1_TIMER0 MQS_RIGHT LPSPI4_PCS0 FLEXIO2_FLEXIO00 GPIO2_IO00 SEMC_CSX01 ENET2_MDC ~ ~
PB1 = portB + 1 // [B0_01]: LCD_ENABLE QTIMER1_TIMER1 MQS_LEFT LPSPI4_SDI FLEXIO2_FLEXIO01 GPIO2_IO01 SEMC_CSX02 ENET2_MDIO ~ ~
PB2 = portB + 2 // [B0_02]: LCD_HSYNC QTIMER1_TIMER2 FLEXCAN1_TX LPSPI4_SDO FLEXIO2_FLEXIO02 GPIO2_IO02 SEMC_CSX03 ENET2_1588_EVENT0_OUT ~ ~
PB3 = portB + 3 // [B0_03]: LCD_VSYNC QTIMER2_TIMER0 FLEXCAN1_RX LPSPI4_SCK FLEXIO2_FLEXIO03 GPIO2_IO03 WDOG2_RESET_B_DEB ENET2_1588_EVENT0_IN ~ ~
PB4 = portB + 4 // [B0_04]: LCD_DATA00 QTIMER2_TIMER1 LPI2C2_SCL ARM_TRACE0 FLEXIO2_FLEXIO04 GPIO2_IO04 SRC_BOOT_CFG00 ENET2_TDATA03 ~ ~
PB5 = portB + 5 // [B0_05]: LCD_DATA01 QTIMER2_TIMER2 LPI2C2_SDA ARM_TRACE1 FLEXIO2_FLEXIO05 GPIO2_IO05 SRC_BOOT_CFG01 ENET2_TDATA02 ~ ~
PB6 = portB + 6 // [B0_06]: LCD_DATA02 QTIMER3_TIMER0 FLEXPWM2_PWMA00 ARM_TRACE2 FLEXIO2_FLEXIO06 GPIO2_IO06 SRC_BOOT_CFG02 ENET2_RX_CLK ~ ~
PB7 = portB + 7 // [B0_07]: LCD_DATA03 QTIMER3_TIMER1 FLEXPWM2_PWMB00 ARM_TRACE3 FLEXIO2_FLEXIO07 GPIO2_IO07 SRC_BOOT_CFG03 ENET2_TX_ER ~ ~
PB8 = portB + 8 // [B0_08]: LCD_DATA04 QTIMER3_TIMER2 FLEXPWM2_PWMA01 LPUART3_TX FLEXIO2_FLEXIO08 GPIO2_IO08 SRC_BOOT_CFG04 ENET2_RDATA03 ~ ~
PB9 = portB + 9 // [B0_09]: LCD_DATA05 QTIMER4_TIMER0 FLEXPWM2_PWMB01 LPUART3_RX FLEXIO2_FLEXIO09 GPIO2_IO09 SRC_BOOT_CFG05 ENET2_RDATA02 ~ ~
PB10 = portB + 10 // [B0_10]: LCD_DATA06 QTIMER4_TIMER1 FLEXPWM2_PWMA02 SAI1_TX_DATA03 FLEXIO2_FLEXIO10 GPIO2_IO10 SRC_BOOT_CFG06 ENET2_CRS ~ ~
PB11 = portB + 11 // [B0_11]: LCD_DATA07 QTIMER4_TIMER2 FLEXPWM2_PWMB02 SAI1_TX_DATA02 FLEXIO2_FLEXIO11 GPIO2_IO11 SRC_BOOT_CFG07 ENET2_COL ~ ~
PB12 = portB + 12 // [B0_12]: LCD_DATA08 XBAR1_INOUT10 ARM_TRACE_CLK SAI1_TX_DATA01 FLEXIO2_FLEXIO12 GPIO2_IO12 SRC_BOOT_CFG08 ENET2_TDATA00 ~ ~
PB13 = portB + 13 // [B0_13]: LCD_DATA09 XBAR1_INOUT11 ARM_TRACE_SWO SAI1_MCLK FLEXIO2_FLEXIO13 GPIO2_IO13 SRC_BOOT_CFG09 ENET2_TDATA01 ~ ~
PB14 = portB + 14 // [B0_14]: LCD_DATA10 XBAR1_INOUT12 ARM_TXEV SAI1_RX_SYNC FLEXIO2_FLEXIO14 GPIO2_IO14 SRC_BOOT_CFG10 ENET2_TX_EN ~ ~
PB15 = portB + 15 // [B0_15]: LCD_DATA11 XBAR1_INOUT13 ARM_RXEV SAI1_RX_BCLK FLEXIO2_FLEXIO15 GPIO2_IO15 SRC_BOOT_CFG11 ENET2_TX_CLK ENET2_REF_CLK2 ~
PB16 = portB + 16 // [B1_00]: LCD_DATA12 XBAR1_INOUT14 LPUART4_TX SAI1_RX_DATA00 FLEXIO2_FLEXIO16 GPIO2_IO16 FLEXPWM1_PWMA03 ENET2_RX_ER FLEXIO3_FLEXIO16 ~
PB17 = portB + 17 // [B1_01]: LCD_DATA13 XBAR1_INOUT15 LPUART4_RX SAI1_TX_DATA00 FLEXIO2_FLEXIO17 GPIO2_IO17 FLEXPWM1_PWMB03 ENET2_RDATA00 FLEXIO3_FLEXIO17 ~
PB18 = portB + 18 // [B1_02]: LCD_DATA14 XBAR1_INOUT16 LPSPI4_PCS2 SAI1_TX_BCLK FLEXIO2_FLEXIO18 GPIO2_IO18 FLEXPWM2_PWMA03 ENET2_RDATA01 FLEXIO3_FLEXIO18 ~
PB19 = portB + 19 // [B1_03]: LCD_DATA15 XBAR1_INOUT17 LPSPI4_PCS1 SAI1_TX_SYNC FLEXIO2_FLEXIO19 GPIO2_IO19 FLEXPWM2_PWMB03 ENET2_RX_EN FLEXIO3_FLEXIO19 ~
PB20 = portB + 20 // [B1_04]: LCD_DATA16 LPSPI4_PCS0 CSI_DATA15 ENET_RX_DATA00 FLEXIO2_FLEXIO20 GPIO2_IO20 GPT1_CLK FLEXIO3_FLEXIO20 ~ ~
PB21 = portB + 21 // [B1_05]: LCD_DATA17 LPSPI4_SDI CSI_DATA14 ENET_RX_DATA01 FLEXIO2_FLEXIO21 GPIO2_IO21 GPT1_CAPTURE1 FLEXIO3_FLEXIO21 ~ ~
PB22 = portB + 22 // [B1_06]: LCD_DATA18 LPSPI4_SDO CSI_DATA13 ENET_RX_EN FLEXIO2_FLEXIO22 GPIO2_IO22 GPT1_CAPTURE2 FLEXIO3_FLEXIO22 ~ ~
PB23 = portB + 23 // [B1_07]: LCD_DATA19 LPSPI4_SCK CSI_DATA12 ENET_TX_DATA00 FLEXIO2_FLEXIO23 GPIO2_IO23 GPT1_COMPARE1 FLEXIO3_FLEXIO23 ~ ~
PB24 = portB + 24 // [B1_08]: LCD_DATA20 QTIMER1_TIMER3 CSI_DATA11 ENET_TX_DATA01 FLEXIO2_FLEXIO24 GPIO2_IO24 FLEXCAN2_TX GPT1_COMPARE2 FLEXIO3_FLEXIO24 ~
PB25 = portB + 25 // [B1_09]: LCD_DATA21 QTIMER2_TIMER3 CSI_DATA10 ENET_TX_EN FLEXIO2_FLEXIO25 GPIO2_IO25 FLEXCAN2_RX GPT1_COMPARE3 FLEXIO3_FLEXIO25 ~
PB26 = portB + 26 // [B1_10]: LCD_DATA22 QTIMER3_TIMER3 CSI_DATA00 ENET_TX_CLK FLEXIO2_FLEXIO26 GPIO2_IO26 ENET_REF_CLK FLEXIO3_FLEXIO26 ~ ~
PB27 = portB + 27 // [B1_11]: LCD_DATA23 QTIMER4_TIMER3 CSI_DATA01 ENET_RX_ER FLEXIO2_FLEXIO27 GPIO2_IO27 LPSPI4_PCS3 FLEXIO3_FLEXIO27 ~ ~
PB28 = portB + 28 // [B1_12]: LPUART5_TX CSI_PIXCLK ENET_1588_EVENT0_IN FLEXIO2_FLEXIO28 GPIO2_IO28 USDHC1_CD_B FLEXIO3_FLEXIO28 ~ ~ ~
PB29 = portB + 29 // [B1_13]: WDOG1_B LPUART5_RX CSI_VSYNC ENET_1588_EVENT0_OUT FLEXIO2_FLEXIO29 GPIO2_IO29 USDHC1_WP SEMC_DQS4 FLEXIO3_FLEXIO29 ~
PB30 = portB + 30 // [B1_14]: ENET_MDC FLEXPWM4_PWMA02 CSI_HSYNC XBAR1_IN02 FLEXIO2_FLEXIO30 GPIO2_IO30 USDHC1_VSELECT ENET2_TDATA00 FLEXIO3_FLEXIO30 ~
PB31 = portB + 31 // [B1_15]: ENET_MDIO FLEXPWM4_PWMA03 CSI_MCLK XBAR1_IN03 FLEXIO2_FLEXIO31 GPIO2_IO31 USDHC1_RESET_B ENET2_TDATA01 FLEXIO3_FLEXIO31 ~
PC0 = portC + 0 // [SD_B1_00]: USDHC2_DATA3 FLEXSPIB_DATA03 FLEXPWM1_PWMA03 SAI1_TX_DATA03 LPUART4_TX GPIO3_IO00 SAI3_RX_DATA ~ ~ ~
PC1 = portC + 1 // [SD_B1_01]: USDHC2_DATA2 FLEXSPIB_DATA02 FLEXPWM1_PWMB03 SAI1_TX_DATA02 LPUART4_RX GPIO3_IO01 SAI3_TX_DATA ~ ~ ~
PC2 = portC + 2 // [SD_B1_02]: USDHC2_DATA1 FLEXSPIB_DATA01 FLEXPWM2_PWMA03 SAI1_TX_DATA01 FLEXCAN1_TX GPIO3_IO02 CCM_WAIT SAI3_TX_SYNC ~ ~
PC3 = portC + 3 // [SD_B1_03]: USDHC2_DATA0 FLEXSPIB_DATA00 FLEXPWM2_PWMB03 SAI1_MCLK FLEXCAN1_RX GPIO3_IO03 CCM_PMIC_READY SAI3_TX_BCLK ~ ~
PC4 = portC + 4 // [SD_B1_04]: USDHC2_CLK FLEXSPIB_SCLK LPI2C1_SCL SAI1_RX_SYNC FLEXSPIA_SS1_B GPIO3_IO04 CCM_STOP SAI3_MCLK ~ ~
PC5 = portC + 5 // [SD_B1_05]: USDHC2_CMD FLEXSPIA_DQS LPI2C1_SDA SAI1_RX_BCLK FLEXSPIB_SS0_B GPIO3_IO05 SAI3_RX_SYNC ~ ~ ~
PC6 = portC + 6 // [SD_B1_06]: USDHC2_RESET_B FLEXSPIA_SS0_B LPUART7_CTS_B SAI1_RX_DATA00 LPSPI2_PCS0 GPIO3_IO06 SAI3_RX_BCLK ~ ~ ~
PC7 = portC + 7 // [SD_B1_07]: SEMC_CSX01 FLEXSPIA_SCLK LPUART7_RTS_B SAI1_TX_DATA00 LPSPI2_SCK GPIO3_IO07 ~ ~ ~ ~
PC8 = portC + 8 // [SD_B1_08]: USDHC2_DATA4 FLEXSPIA_DATA00 LPUART7_TX SAI1_TX_BCLK LPSPI2_SD0 GPIO3_IO08 SEMC_CSX02 ~ ~ ~
PC9 = portC + 9 // [SD_B1_09]: USDHC2_DATA5 FLEXSPIA_DATA01 LPUART7_RX SAI1_TX_SYNC LPSPI2_SDI GPIO3_IO09 ~ ~ ~ ~
PC10 = portC + 10 // [SD_B1_10]: USDHC2_DATA6 FLEXSPIA_DATA02 LPUART2_RX LPI2C2_SDA LPSPI2_PCS2 GPIO3_IO10 ~ ~ ~ ~
PC11 = portC + 11 // [SD_B1_11]: USDHC2_DATA7 FLEXSPIA_DATA03 LPUART2_TX LPI2C2_SCL LPSPI2_PCS3 GPIO3_IO11 ~ ~ ~ ~
PC12 = portC + 12 // [SD_B0_00]: USDHC1_CMD FLEXPWM1_PWMA00 LPI2C3_SCL XBAR1_INOUT04 LPSPI1_SCK GPIO3_IO12 FLEXSPIA_SS1_B ENET2_TX_EN SEMC_DQS4 ~
PC13 = portC + 13 // [SD_B0_01]: USDHC1_CLK FLEXPWM1_PWMB00 LPI2C3_SDA XBAR1_INOUT05 LPSPI1_PCS0 GPIO3_IO13 FLEXSPIB_SS1_B ENET2_TX_CLK ENET2_REF_CLK2 ~
PC14 = portC + 14 // [SD_B0_02]: USDHC1_DATA0 FLEXPWM1_PWMA01 LPUART8_CTS_B XBAR1_INOUT06 LPSPI1_SDO GPIO3_IO14 ENET2_RX_ER SEMC_CLK5 ~ ~
PC15 = portC + 15 // [SD_B0_03]: USDHC1_DATA1 FLEXPWM1_PWMB01 LPUART8_RTS_B XBAR1_INOUT07 LPSPI1_SDI GPIO3_IO15 ENET2_RDATA00 SEMC_CLK6 ~ ~
PC16 = portC + 16 // [SD_B0_04]: USDHC1_DATA2 FLEXPWM1_PWMA02 LPUART8_TX XBAR1_INOUT08 FLEXSPIB_SS0_B GPIO3_IO16 CCM_CLKO1 ENET2_RDATA01 ~ ~
PC17 = portC + 17 // [SD_B0_05]: USDHC1_DATA3 FLEXPWM1_PWMB02 LPUART8_RX XBAR1_INOUT09 FLEXSPIB_DQS GPIO3_IO17 CCM_CLKO2 ENET2_RX_EN ~ ~
PC18 = portC + 18 // [EMC_32]: SEMC_DATA10 FLEXPWM3_PWMB01 LPUART7_RX CCM_PMIC_RDY CSI_DATA21 GPIO3_IO18 ENET2_TX_EN ~ ~ ~
PC19 = portC + 19 // [EMC_33]: SEMC_DATA11 FLEXPWM3_PWMA02 USDHC1_RESET_B SAI3_RX_DATA CSI_DATA20 GPIO3_IO19 ENET2_TX_CLK ENET2_REF_CLK2 ~ ~
PC20 = portC + 20 // [EMC_34]: SEMC_DATA12 FLEXPWM3_PWMB02 USDHC1_VSELECT SAI3_RX_SYNC CSI_DATA19 GPIO3_IO20 ENET2_RX_ER ~ ~ ~
PC21 = portC + 21 // [EMC_35]: SEMC_DATA13 XBAR1_INOUT18 GPT1_COMPARE1 SAI3_RX_BCLK CSI_DATA18 GPIO3_IO21 USDHC1_CD_B ENET2_RDATA00 ~ ~
PC22 = portC + 22 // [EMC_36]: SEMC_DATA14 XBAR1_IN22 GPT1_COMPARE2 SAI3_TX_DATA CSI_DATA17 GPIO3_IO22 USDHC1_WP ENET2_RDATA01 FLEXCAN3_TX ~
PC23 = portC + 23 // [EMC_37]: SEMC_DATA15 XBAR1_IN23 GPT1_COMPARE3 SAI3_MCLK CSI_DATA16 GPIO3_IO23 USDHC2_WP ENET2_RX_EN FLEXCAN3_RX ~
PC24 = portC + 24 // [EMC_38]: SEMC_DM01 FLEXPWM1_PWMA03 LPUART8_TX SAI3_TX_BCLK CSI_FIELD GPIO3_IO24 USDHC2_VSELECT ENET2_MDC ~ ~
PC25 = portC + 25 // [EMC_39]: SEMC_DQS FLEXPWM1_PWMB03 LPUART8_RX SAI3_TX_SYNC WDOG1_WDOG_B GPIO3_IO25 USDHC2_CD_B ENET2_MDIO SEMC_DQS4 ~
PC26 = portC + 26 // [EMC_40]: SEMC_RDY GPT2_CAPTURE2 LPSPI1_PCS2 USB_OTG2_OC ENET_MDC GPIO3_IO26 USDHC2_RESET_B SEMC_CLK5 ~ ~
PC27 = portC + 27 // [EMC_41]: SEMC_CSX00 GPT2_CAPTURE1 LPSPI1_PCS3 USB_OTG2_PWR ENET_MDIO GPIO3_IO27 USDHC1_VSELECT ~ ~ ~
_ = portC + 28 //
_ = portC + 29 //
_ = portC + 30 //
_ = portC + 31 //
PD0 = portD + 0 // [EMC_00]: SEMC_DATA00 FLEXPWM4_PWMA00 LPSPI2_SCK XBAR1_XBAR_IN02 FLEXIO1_FLEXIO00 GPIO4_IO00 ~ ~ ~ ~
PD1 = portD + 1 // [EMC_01]: SEMC_DATA01 FLEXPWM4_PWMB00 LPSPI2_PCS0 XBAR1_IN03 FLEXIO1_FLEXIO01 GPIO4_IO01 ~ ~ ~ ~
PD2 = portD + 2 // [EMC_02]: SEMC_DATA02 FLEXPWM4_PWMA01 LPSPI2_SDO XBAR1_INOUT04 FLEXIO1_FLEXIO02 GPIO4_IO02 ~ ~ ~ ~
PD3 = portD + 3 // [EMC_03]: SEMC_DATA03 FLEXPWM4_PWMB01 LPSPI2_SDI XBAR1_INOUT05 FLEXIO1_FLEXIO03 GPIO4_IO03 ~ ~ ~ ~
PD4 = portD + 4 // [EMC_04]: SEMC_DATA04 FLEXPWM4_PWMA02 SAI2_TX_DATA XBAR1_INOUT06 FLEXIO1_FLEXIO04 GPIO4_IO04 ~ ~ ~ ~
PD5 = portD + 5 // [EMC_05]: SEMC_DATA05 FLEXPWM4_PWMB02 SAI2_TX_SYNC XBAR1_INOUT07 FLEXIO1_FLEXIO05 GPIO4_IO05 ~ ~ ~ ~
PD6 = portD + 6 // [EMC_06]: SEMC_DATA06 FLEXPWM2_PWMA00 SAI2_TX_BCLK XBAR1_INOUT08 FLEXIO1_FLEXIO06 GPIO4_IO06 ~ ~ ~ ~
PD7 = portD + 7 // [EMC_07]: SEMC_DATA07 FLEXPWM2_PWMB00 SAI2_MCLK XBAR1_INOUT09 FLEXIO1_FLEXIO07 GPIO4_IO07 ~ ~ ~ ~
PD8 = portD + 8 // [EMC_08]: SEMC_DM00 FLEXPWM2_PWMA01 SAI2_RX_DATA XBAR1_INOUT17 FLEXIO1_FLEXIO08 GPIO4_IO08 ~ ~ ~ ~
PD9 = portD + 9 // [EMC_09]: SEMC_ADDR00 FLEXPWM2_PWMB01 SAI2_RX_SYNC FLEXCAN2_TX FLEXIO1_FLEXIO09 GPIO4_IO09 FLEXSPI2_B_SS1_B ~ ~ ~
PD10 = portD + 10 // [EMC_10]: SEMC_ADDR01 FLEXPWM2_PWMA02 SAI2_RX_BCLK FLEXCAN2_RX FLEXIO1_FLEXIO10 GPIO4_IO10 FLEXSPI2_B_SS0_B ~ ~ ~
PD11 = portD + 11 // [EMC_11]: SEMC_ADDR02 FLEXPWM2_PWMB02 LPI2C4_SDA USDHC2_RESET_B FLEXIO1_FLEXIO11 GPIO4_IO11 FLEXSPI2_B_DQS ~ ~ ~
PD12 = portD + 12 // [EMC_12]: SEMC_ADDR03 XBAR1_IN24 LPI2C4_SCL USDHC1_WP FLEXPWM1_PWMA03 GPIO4_IO12 FLEXSPI2_B_SCLK ~ ~ ~
PD13 = portD + 13 // [EMC_13]: SEMC_ADDR04 XBAR1_IN25 LPUART3_TX MQS_RIGHT FLEXPWM1_PWMB03 GPIO4_IO13 FLEXSPI2_B_DATA00 ~ ~ ~
PD14 = portD + 14 // [EMC_14]: SEMC_ADDR05 XBAR1_INOUT19 LPUART3_RX MQS_LEFT LPSPI2_PCS1 GPIO4_IO14 FLEXSPI2_B_DATA01 ~ ~ ~
PD15 = portD + 15 // [EMC_15]: SEMC_ADDR06 XBAR1_IN20 LPUART3_CTS_B SPDIF_OUT QTIMER3_TIMER0 GPIO4_IO15 FLEXSPI2_B_DATA02 ~ ~ ~
PD16 = portD + 16 // [EMC_16]: SEMC_ADDR07 XBAR1_IN21 LPUART3_RTS_B SPDIF_IN QTIMER3_TIMER1 GPIO4_IO16 FLEXSPI2_B_DATA03 ~ ~ ~
PD17 = portD + 17 // [EMC_17]: SEMC_ADDR08 FLEXPWM4_PWMA03 LPUART4_CTS_B FLEXCAN1_TX QTIMER3_TIMER2 GPIO4_IO17 ~ ~ ~ ~
PD18 = portD + 18 // [EMC_18]: SEMC_ADDR09 FLEXPWM4_PWMB03 LPUART4_RTS_B FLEXCAN1_RX QTIMER3_TIMER3 GPIO4_IO18 SNVS_VIO_5_CTL ~ ~ ~
PD19 = portD + 19 // [EMC_19]: SEMC_ADDR11 FLEXPWM2_PWMA03 LPUART4_TX ENET_RDATA01 QTIMER2_TIMER0 GPIO4_IO19 SNVS_VIO_5 ~ ~ ~
PD20 = portD + 20 // [EMC_20]: SEMC_ADDR12 FLEXPWM2_PWMB03 LPUART4_RX ENET_RDATA00 QTIMER2_TIMER1 GPIO4_IO20 ~ ~ ~ ~
PD21 = portD + 21 // [EMC_21]: SEMC_BA0 FLEXPWM3_PWMA03 LPI2C3_SDA ENET_TDATA01 QTIMER2_TIMER2 GPIO4_IO21 ~ ~ ~ ~
PD22 = portD + 22 // [EMC_22]: SEMC_BA1 FLEXPWM3_PWMB03 LPI2C3_SCL ENET_TDATA00 QTIMER2_TIMER3 GPIO4_IO22 FLEXSPI2_A_SS1_B ~ ~ ~
PD23 = portD + 23 // [EMC_23]: SEMC_ADDR10 FLEXPWM1_PWMA00 LPUART5_TX ENET_RX_EN GPT1_CAPTURE2 GPIO4_IO23 FLEXSPI2_A_DQS ~ ~ ~
PD24 = portD + 24 // [EMC_24]: SEMC_CAS FLEXPWM1_PWMB00 LPUART5_RX ENET_TX_EN GPT1_CAPTURE1 GPIO4_IO24 FLEXSPI2_A_SS0_B ~ ~ ~
PD25 = portD + 25 // [EMC_25]: SEMC_RAS FLEXPWM1_PWMA01 LPUART6_TX ENET_TX_CLK ENET_REF_CLK GPIO4_IO25 FLEXSPI2_A_SCLK ~ ~ ~
PD26 = portD + 26 // [EMC_26]: SEMC_CLK FLEXPWM1_PWMB01 LPUART6_RX ENET_RX_ER FLEXIO1_FLEXIO12 GPIO4_IO26 FLEXSPI2_A_DATA00 ~ ~ ~
PD27 = portD + 27 // [EMC_27]: SEMC_CKE FLEXPWM1_PWMA02 LPUART5_RTS_B LPSPI1_SCK FLEXIO1_FLEXIO13 GPIO4_IO27 FLEXSPI2_A_DATA01 ~ ~ ~
PD28 = portD + 28 // [EMC_28]: SEMC_WE FLEXPWM1_PWMB02 LPUART5_CTS_B LPSPI1_SDO FLEXIO1_FLEXIO14 GPIO4_IO28 FLEXSPI2_A_DATA02 ~ ~ ~
PD29 = portD + 29 // [EMC_29]: SEMC_CS0 FLEXPWM3_PWMA00 LPUART6_RTS_B LPSPI1_SDI FLEXIO1_FLEXIO15 GPIO4_IO29 FLEXSPI2_A_DATA03 ~ ~ ~
PD30 = portD + 30 // [EMC_30]: SEMC_DATA08 FLEXPWM3_PWMB00 LPUART6_CTS_B LPSPI1_PCS0 CSI_DATA23 GPIO4_IO30 ENET2_TDATA00 ~ ~ ~
PD31 = portD + 31 // [EMC_31]: SEMC_DATA09 FLEXPWM3_PWMA01 LPUART7_TX LPSPI1_PCS1 CSI_DATA22 GPIO4_IO31 ENET2_TDATA01 ~ ~ ~
)
const (
Mode0 = 0
Mode1 = 1
Mode2 = 2
Mode3 = 3
)
SPI phase and polarity configs CPOL and CPHA
const (
// ParityNone means to not use any parity checking. This is
// the most common setting.
ParityNone UARTParity = iota
// ParityEven means to expect that the total number of 1 bits sent
// should be an even number.
ParityEven
// ParityOdd means to expect that the total number of 1 bits sent
// should be an odd number.
ParityOdd
)
Variables
var (
DefaultUART = UART1
)
Default peripherals
var (
UART1 = &_UART1
_UART1 = UART{
Bus: nxp.LPUART6,
Buffer: NewRingBuffer(),
txBuffer: NewRingBuffer(),
muxRX: muxSelect{
mux: nxp.IOMUXC_LPUART6_RX_SELECT_INPUT_DAISY_GPIO_AD_B0_03_ALT2,
sel: &nxp.IOMUXC.LPUART6_RX_SELECT_INPUT,
},
muxTX: muxSelect{
mux: nxp.IOMUXC_LPUART6_TX_SELECT_INPUT_DAISY_GPIO_AD_B0_02_ALT2,
sel: &nxp.IOMUXC.LPUART6_TX_SELECT_INPUT,
},
}
UART2 = &_UART2
_UART2 = UART{
Bus: nxp.LPUART4,
Buffer: NewRingBuffer(),
txBuffer: NewRingBuffer(),
muxRX: muxSelect{
mux: nxp.IOMUXC_LPUART4_RX_SELECT_INPUT_DAISY_GPIO_B1_01_ALT2,
sel: &nxp.IOMUXC.LPUART4_RX_SELECT_INPUT,
},
muxTX: muxSelect{
mux: nxp.IOMUXC_LPUART4_TX_SELECT_INPUT_DAISY_GPIO_B1_00_ALT2,
sel: &nxp.IOMUXC.LPUART4_TX_SELECT_INPUT,
},
}
UART3 = &_UART3
_UART3 = UART{
Bus: nxp.LPUART2,
Buffer: NewRingBuffer(),
txBuffer: NewRingBuffer(),
muxRX: muxSelect{
mux: nxp.IOMUXC_LPUART2_RX_SELECT_INPUT_DAISY_GPIO_AD_B1_03_ALT2,
sel: &nxp.IOMUXC.LPUART2_RX_SELECT_INPUT,
},
muxTX: muxSelect{
mux: nxp.IOMUXC_LPUART2_TX_SELECT_INPUT_DAISY_GPIO_AD_B1_02_ALT2,
sel: &nxp.IOMUXC.LPUART2_TX_SELECT_INPUT,
},
}
UART4 = &_UART4
_UART4 = UART{
Bus: nxp.LPUART3,
Buffer: NewRingBuffer(),
txBuffer: NewRingBuffer(),
muxRX: muxSelect{
mux: nxp.IOMUXC_LPUART3_RX_SELECT_INPUT_DAISY_GPIO_AD_B1_07_ALT2,
sel: &nxp.IOMUXC.LPUART3_RX_SELECT_INPUT,
},
muxTX: muxSelect{
mux: nxp.IOMUXC_LPUART3_TX_SELECT_INPUT_DAISY_GPIO_AD_B1_06_ALT2,
sel: &nxp.IOMUXC.LPUART3_TX_SELECT_INPUT,
},
}
UART5 = &_UART5
_UART5 = UART{
Bus: nxp.LPUART8,
Buffer: NewRingBuffer(),
txBuffer: NewRingBuffer(),
muxRX: muxSelect{
mux: nxp.IOMUXC_LPUART8_RX_SELECT_INPUT_DAISY_GPIO_AD_B1_11_ALT2,
sel: &nxp.IOMUXC.LPUART8_RX_SELECT_INPUT,
},
muxTX: muxSelect{
mux: nxp.IOMUXC_LPUART8_TX_SELECT_INPUT_DAISY_GPIO_AD_B1_10_ALT2,
sel: &nxp.IOMUXC.LPUART8_TX_SELECT_INPUT,
},
}
UART6 = &_UART6
_UART6 = UART{
Bus: nxp.LPUART1,
Buffer: NewRingBuffer(),
txBuffer: NewRingBuffer(),
}
UART7 = &_UART7
_UART7 = UART{
Bus: nxp.LPUART7,
Buffer: NewRingBuffer(),
txBuffer: NewRingBuffer(),
muxRX: muxSelect{
mux: nxp.IOMUXC_LPUART7_RX_SELECT_INPUT_DAISY_GPIO_EMC_32_ALT2,
sel: &nxp.IOMUXC.LPUART7_RX_SELECT_INPUT,
},
muxTX: muxSelect{
mux: nxp.IOMUXC_LPUART7_TX_SELECT_INPUT_DAISY_GPIO_EMC_31_ALT2,
sel: &nxp.IOMUXC.LPUART7_TX_SELECT_INPUT,
},
}
)
var (
SPI0 = SPI1 // SPI0 is an alias of SPI1 (LPSPI4)
SPI1 = &_SPI1
_SPI1 = SPI{
Bus: nxp.LPSPI4,
muxSDI: muxSelect{
mux: nxp.IOMUXC_LPSPI4_SDI_SELECT_INPUT_DAISY_GPIO_B0_01_ALT3,
sel: &nxp.IOMUXC.LPSPI4_SDI_SELECT_INPUT,
},
muxSDO: muxSelect{
mux: nxp.IOMUXC_LPSPI4_SDO_SELECT_INPUT_DAISY_GPIO_B0_02_ALT3,
sel: &nxp.IOMUXC.LPSPI4_SDO_SELECT_INPUT,
},
muxSCK: muxSelect{
mux: nxp.IOMUXC_LPSPI4_SCK_SELECT_INPUT_DAISY_GPIO_B0_03_ALT3,
sel: &nxp.IOMUXC.LPSPI4_SCK_SELECT_INPUT,
},
muxCS: muxSelect{
mux: nxp.IOMUXC_LPSPI4_PCS0_SELECT_INPUT_DAISY_GPIO_B0_00_ALT3,
sel: &nxp.IOMUXC.LPSPI4_PCS0_SELECT_INPUT,
},
}
SPI2 = &_SPI2
_SPI2 = SPI{
Bus: nxp.LPSPI3,
muxSDI: muxSelect{
mux: nxp.IOMUXC_LPSPI3_SDI_SELECT_INPUT_DAISY_GPIO_AD_B0_02_ALT7,
sel: &nxp.IOMUXC.LPSPI3_SDI_SELECT_INPUT,
},
muxSDO: muxSelect{
mux: nxp.IOMUXC_LPSPI3_SDO_SELECT_INPUT_DAISY_GPIO_AD_B1_14_ALT2,
sel: &nxp.IOMUXC.LPSPI3_SDO_SELECT_INPUT,
},
muxSCK: muxSelect{
mux: nxp.IOMUXC_LPSPI3_SCK_SELECT_INPUT_DAISY_GPIO_AD_B1_15,
sel: &nxp.IOMUXC.LPSPI3_SCK_SELECT_INPUT,
},
muxCS: muxSelect{
mux: nxp.IOMUXC_LPSPI3_PCS0_SELECT_INPUT_DAISY_GPIO_AD_B0_03_ALT7,
sel: &nxp.IOMUXC.LPSPI3_PCS0_SELECT_INPUT,
},
}
SPI3 = &_SPI3
_SPI3 = SPI{
Bus: nxp.LPSPI1,
muxSDI: muxSelect{
mux: nxp.IOMUXC_LPSPI1_SDI_SELECT_INPUT_DAISY_GPIO_SD_B0_03_ALT4,
sel: &nxp.IOMUXC.LPSPI1_SDI_SELECT_INPUT,
},
muxSDO: muxSelect{
mux: nxp.IOMUXC_LPSPI1_SDO_SELECT_INPUT_DAISY_GPIO_SD_B0_02_ALT4,
sel: &nxp.IOMUXC.LPSPI1_SDO_SELECT_INPUT,
},
muxSCK: muxSelect{
mux: nxp.IOMUXC_LPSPI1_SCK_SELECT_INPUT_DAISY_GPIO_SD_B0_00_ALT4,
sel: &nxp.IOMUXC.LPSPI1_SCK_SELECT_INPUT,
},
muxCS: muxSelect{
mux: nxp.IOMUXC_LPSPI1_PCS0_SELECT_INPUT_DAISY_GPIO_SD_B0_01_ALT4,
sel: &nxp.IOMUXC.LPSPI1_PCS0_SELECT_INPUT,
},
}
)
var (
I2C0 = I2C1 // I2C0 is an alias for I2C1 (LPI2C1)
I2C1 = &_I2C1
_I2C1 = I2C{
Bus: nxp.LPI2C1,
sda: I2C1_SDA_PIN,
scl: I2C1_SCL_PIN,
muxSDA: muxSelect{
mux: nxp.IOMUXC_LPI2C1_SDA_SELECT_INPUT_DAISY_GPIO_AD_B1_01_ALT3,
sel: &nxp.IOMUXC.LPI2C1_SDA_SELECT_INPUT,
},
muxSCL: muxSelect{
mux: nxp.IOMUXC_LPI2C1_SCL_SELECT_INPUT_DAISY_GPIO_AD_B1_00_ALT3,
sel: &nxp.IOMUXC.LPI2C1_SCL_SELECT_INPUT,
},
}
I2C2 = &_I2C2
_I2C2 = I2C{
Bus: nxp.LPI2C3,
sda: I2C2_SDA_PIN,
scl: I2C2_SCL_PIN,
muxSDA: muxSelect{
mux: nxp.IOMUXC_LPI2C3_SDA_SELECT_INPUT_DAISY_GPIO_AD_B1_06_ALT1,
sel: &nxp.IOMUXC.LPI2C3_SDA_SELECT_INPUT,
},
muxSCL: muxSelect{
mux: nxp.IOMUXC_LPI2C3_SCL_SELECT_INPUT_DAISY_GPIO_AD_B1_07_ALT1,
sel: &nxp.IOMUXC.LPI2C3_SCL_SELECT_INPUT,
},
}
I2C3 = &_I2C3
_I2C3 = I2C{
Bus: nxp.LPI2C4,
sda: I2C3_SDA_PIN,
scl: I2C3_SCL_PIN,
muxSDA: muxSelect{
mux: nxp.IOMUXC_LPI2C4_SDA_SELECT_INPUT_DAISY_GPIO_AD_B0_13_ALT0,
sel: &nxp.IOMUXC.LPI2C4_SDA_SELECT_INPUT,
},
muxSCL: muxSelect{
mux: nxp.IOMUXC_LPI2C4_SCL_SELECT_INPUT_DAISY_GPIO_AD_B0_12_ALT0,
sel: &nxp.IOMUXC.LPI2C4_SCL_SELECT_INPUT,
},
}
)
var (
ErrTimeoutRNG = errors.New("machine: RNG Timeout")
ErrClockRNG = errors.New("machine: RNG Clock Error")
ErrSeedRNG = errors.New("machine: RNG Seed Error")
ErrInvalidInputPin = errors.New("machine: invalid input pin")
ErrInvalidOutputPin = errors.New("machine: invalid output pin")
ErrInvalidClockPin = errors.New("machine: invalid clock pin")
ErrInvalidDataPin = errors.New("machine: invalid data pin")
ErrNoPinChangeChannel = errors.New("machine: no channel available for pin interrupt")
)
var (
ErrPWMPeriodTooLong = errors.New("pwm: period too long")
)
var Serial = DefaultUART
Serial is implemented via the default (usually the first) UART on the chip.
var (
ErrTxInvalidSliceSize = errors.New("SPI write and read slices must be same size")
errSPIInvalidMachineConfig = errors.New("SPI port was not configured properly by the machine")
)
func CPUFrequency
func CPUFrequency() uint32
func CPUReset
func CPUReset()
CPUReset performs a hard system reset.
func InitADC
func InitADC()
InitADC is not used by this machine. Use (ADC).Configure().
func InitSerial
func InitSerial()
func NewRingBuffer
func NewRingBuffer() *RingBuffer
NewRingBuffer returns a new ring buffer.
type ADC
type ADC struct {
Pin Pin
}
func (ADC) Configure
func (a ADC) Configure(config ADCConfig)
Configure initializes the receiver’s ADC peripheral and pin for analog input.
func (ADC) Get
func (a ADC) Get() uint16
Get performs a single ADC conversion, returning a 16-bit unsigned integer. The value returned will be scaled (uniformly distributed) if necessary so that it is always in the range [0..65535], regardless of the ADC’s configured bit size (resolution).
type ADCConfig
type ADCConfig struct {
Reference uint32 // analog reference voltage (AREF) in millivolts
Resolution uint32 // number of bits for a single conversion (e.g., 8, 10, 12)
Samples uint32 // number of samples for a single conversion (e.g., 4, 8, 16, 32)
SampleTime uint32 // sample time, in microseconds (µs)
}
ADCConfig holds ADC configuration parameters. If left unspecified, the zero value of each parameter will use the peripheral’s default settings.
type I2C
type I2C struct {
Bus *nxp.LPI2C_Type
// these pins are initialized by each global I2C variable declared in the
// board_teensy4x.go file according to the board manufacturer's default pin
// mapping. they can be overridden with the I2CConfig argument given to
// (*I2C) Configure(I2CConfig).
sda, scl Pin
// these hold the input selector ("daisy chain") values that select which pins
// are connected to the LPI2C device, and should be defined where the I2C
// instance is declared (e.g., in the board definition). see the godoc
// comments on type muxSelect for more details.
muxSDA, muxSCL muxSelect
}
func (*I2C) Configure
func (i2c *I2C) Configure(config I2CConfig) error
Configure is intended to setup an I2C interface for transmit/receive.
func (*I2C) ReadRegister
func (i2c *I2C) ReadRegister(address uint8, register uint8, data []byte) error
ReadRegister transmits the register, restarts the connection as a read operation, and reads the response.
Many I2C-compatible devices are organized in terms of registers. This method is a shortcut to easily read such registers. Also, it only works for devices with 7-bit addresses, which is the vast majority.
func (I2C) ReadRegisterEx
func (i2c I2C) ReadRegisterEx(address uint8, register uint8, data []byte) error
ReadRegisterEx transmits the register, restarts the connection as a read operation, and reads the response.
Many I2C-compatible devices are organized in terms of registers. This method is a shortcut to easily read such registers. Also, it only works for devices with 7-bit addresses, which is the vast majority.
func (I2C) SetBaudRate
func (i2c I2C) SetBaudRate(br uint32) error
SetBaudRate sets the communication speed for I2C.
func (I2C) Tx
func (i2c I2C) Tx(addr uint16, w, r []byte) error
func (*I2C) WriteRegister
func (i2c *I2C) WriteRegister(address uint8, register uint8, data []byte) error
WriteRegister transmits first the register and then the data to the peripheral device.
Many I2C-compatible devices are organized in terms of registers. This method is a shortcut to easily write to such registers. Also, it only works for devices with 7-bit addresses, which is the vast majority.
func (I2C) WriteRegisterEx
func (i2c I2C) WriteRegisterEx(address uint8, register uint8, data []byte) error
WriteRegisterEx transmits first the register and then the data to the peripheral device.
Many I2C-compatible devices are organized in terms of registers. This method is a shortcut to easily write to such registers. Also, it only works for devices with 7-bit addresses, which is the vast majority.
type I2CConfig
type I2CConfig struct {
Frequency uint32
SDA Pin
SCL Pin
}
I2CConfig is used to store config info for I2C.
type I2CMode
type I2CMode int
I2CMode determines if an I2C peripheral is in Controller or Target mode.
type I2CTargetEvent
type I2CTargetEvent uint8
I2CTargetEvent reflects events on the I2C bus
type NullSerial
type NullSerial struct {
}
NullSerial is a serial version of /dev/null (or null router): it drops everything that is written to it.
func (NullSerial) Buffered
func (ns NullSerial) Buffered() int
Buffered returns how many bytes are buffered in the UART. It always returns 0 as there are no bytes to read.
func (NullSerial) Configure
func (ns NullSerial) Configure(config UARTConfig) error
Configure does nothing: the null serial has no configuration.
func (NullSerial) ReadByte
func (ns NullSerial) ReadByte() (byte, error)
ReadByte always returns an error because there aren’t any bytes to read.
func (NullSerial) Write
func (ns NullSerial) Write(p []byte) (n int, err error)
Write is a no-op: none of the data is being written and it will not return an error.
func (NullSerial) WriteByte
func (ns NullSerial) WriteByte(b byte) error
WriteByte is a no-op: the null serial doesn’t write bytes.
type PDMConfig
type PDMConfig struct {
Stereo bool
DIN Pin
CLK Pin
}
type PWMConfig
type PWMConfig struct {
// PWM period in nanosecond. Leaving this zero will pick a reasonable period
// value for use with LEDs.
// If you want to configure a frequency instead of a period, you can use the
// following formula to calculate a period from a frequency:
//
// period = 1e9 / frequency
//
Period uint64
}
PWMConfig allows setting some configuration while configuring a PWM peripheral. A zero PWMConfig is ready to use for simple applications such as dimming LEDs.
type Pin
type Pin uint8
Pin is a single pin on a chip, which may be connected to other hardware devices. It can either be used directly as GPIO pin or it can be used in other peripherals like ADC, I2C, etc.
func (Pin) Configure
func (p Pin) Configure(config PinConfig)
Configure sets the GPIO pad and pin properties, and selects the appropriate alternate function, for a given Pin and PinConfig.
func (Pin) Get
func (p Pin) Get() bool
Get returns the current value of a GPIO pin.
func (Pin) High
func (p Pin) High()
High sets this GPIO pin to high, assuming it has been configured as an output pin. It is hardware dependent (and often undefined) what happens if you set a pin to high that is not configured as an output pin.
func (Pin) Low
func (p Pin) Low()
Low sets this GPIO pin to low, assuming it has been configured as an output pin. It is hardware dependent (and often undefined) what happens if you set a pin to low that is not configured as an output pin.
func (Pin) Set
func (p Pin) Set(value bool)
Set changes the value of the GPIO pin. The pin must be configured as output.
func (Pin) SetInterrupt
func (p Pin) SetInterrupt(change PinChange, callback func(Pin)) error
SetInterrupt sets an interrupt to be executed when a particular pin changes state. The pin should already be configured as an input, including a pull up or down if no external pull is provided.
This call will replace a previously set callback on this pin. You can pass a nil func to unset the pin change interrupt. If you do so, the change parameter is ignored and can be set to any value (such as 0).
func (Pin) Toggle
func (p Pin) Toggle()
Toggle switches an output pin from low to high or from high to low.
type PinChange
type PinChange uint8
type PinConfig
type PinConfig struct {
Mode PinMode
}
type PinMode
type PinMode uint8
PinMode sets the direction and pull mode of the pin. For example, PinOutput sets the pin as an output and PinInputPullup sets the pin as an input with a pull-up.
type RingBuffer
type RingBuffer struct {
rxbuffer [bufferSize]volatile.Register8
head volatile.Register8
tail volatile.Register8
}
RingBuffer is ring buffer implementation inspired by post at https://www.embeddedrelated.com/showthread/comp.arch.embedded/77084-1.php
func (*RingBuffer) Clear
func (rb *RingBuffer) Clear()
Clear resets the head and tail pointer to zero.
func (*RingBuffer) Get
func (rb *RingBuffer) Get() (byte, bool)
Get returns a byte from the buffer. If the buffer is empty, the method will return a false as the second value.
func (*RingBuffer) Put
func (rb *RingBuffer) Put(val byte) bool
Put stores a byte in the buffer. If the buffer is already full, the method will return false.
func (*RingBuffer) Used
func (rb *RingBuffer) Used() uint8
Used returns how many bytes in buffer have been used.
type SPI
type SPI struct {
Bus *nxp.LPSPI_Type
// these hold the input selector ("daisy chain") values that select which pins
// are connected to the LPSPI device, and should be defined where the SPI
// instance is declared (e.g., in the board definition). see the godoc
// comments on type muxSelect for more details.
muxSDI, muxSDO, muxSCK, muxCS muxSelect
// these are copied from SPIConfig, during (*SPI).Configure(SPIConfig), and
// should be considered read-only for internal reference (i.e., modifying them
// will have no desirable effect).
sdi, sdo, sck, cs Pin
frequency uint32
// auxiliary state data used internally
configured bool
}
func (*SPI) Configure
func (spi *SPI) Configure(config SPIConfig) error
Configure is intended to setup an SPI interface for transmit/receive.
func (*SPI) Transfer
func (spi *SPI) Transfer(w byte) (byte, error)
Transfer writes/reads a single byte using the SPI interface.
func (SPI) Tx
func (spi SPI) Tx(w, r []byte) error
Tx handles read/write operation for SPI interface. Since SPI is a syncronous write/read interface, there must always be the same number of bytes written as bytes read. The Tx method knows about this, and offers a few different ways of calling it.
This form sends the bytes in tx buffer, putting the resulting bytes read into the rx buffer. Note that the tx and rx buffers must be the same size:
spi.Tx(tx, rx)
This form sends the tx buffer, ignoring the result. Useful for sending “commands” that return zeros until all the bytes in the command packet have been received:
spi.Tx(tx, nil)
This form sends zeros, putting the result into the rx buffer. Good for reading a “result packet”:
spi.Tx(nil, rx)
type SPIConfig
type SPIConfig struct {
Frequency uint32
SDI Pin
SDO Pin
SCK Pin
CS Pin
LSBFirst bool
Mode uint8
}
SPIConfig is used to store config info for SPI.
type UART
type UART struct {
Bus *nxp.LPUART_Type
Buffer *RingBuffer
Interrupt interrupt.Interrupt
// txBuffer should be allocated globally (such as when UART is created) to
// prevent it being reclaimed or cleaned up prematurely.
txBuffer *RingBuffer
// these hold the input selector ("daisy chain") values that select which pins
// are connected to the LPUART device, and should be defined where the UART
// instance is declared. see the godoc comments on type muxSelect for more
// details.
muxRX, muxTX muxSelect
// these are copied from UARTConfig, during (*UART).Configure(UARTConfig), and
// should be considered read-only for internal reference (i.e., modifying them
// will have no desirable effect).
rx, tx Pin
baud uint32
// auxiliary state data used internally
configured bool
transmitting volatile.Register32
}
func (*UART) Buffered
func (uart *UART) Buffered() int
Buffered returns the number of bytes currently stored in the RX buffer.
func (*UART) Configure
func (uart *UART) Configure(config UARTConfig)
Configure initializes a UART with the given UARTConfig and other default settings.
func (*UART) Disable
func (uart *UART) Disable()
Disable disables the UART interface.
If any buffered data has not yet been transmitted, Disable waits until transmission completes before disabling the interface. The receiver UART’s interrupt is also disabled, and the RX/TX pins are reconfigured for GPIO input (pull-up).
func (*UART) Read
func (uart *UART) Read(data []byte) (n int, err error)
Read from the RX buffer.
func (*UART) ReadByte
func (uart *UART) ReadByte() (byte, error)
ReadByte reads a single byte from the RX buffer. If there is no data in the buffer, returns an error.
func (*UART) Receive
func (uart *UART) Receive(data byte)
Receive handles adding data to the UART’s data buffer. Usually called by the IRQ handler for a machine.
func (*UART) Sync
func (uart *UART) Sync() error
Sync blocks the calling goroutine until all data in the output buffer has been transmitted.
func (*UART) Write
func (uart *UART) Write(data []byte) (n int, err error)
Write data over the UART’s Tx. This function blocks until the data is finished being sent.
func (*UART) WriteByte
func (uart *UART) WriteByte(c byte) error
WriteByte writes a byte of data over the UART’s Tx. This function blocks until the data is finished being sent.
type UARTConfig
type UARTConfig struct {
BaudRate uint32
TX Pin
RX Pin
RTS Pin
CTS Pin
}
UARTConfig is a struct with which a UART (or similar object) can be configured. The baud rate is usually respected, but TX and RX may be ignored depending on the chip and the type of object.
type UARTParity
type UARTParity uint8
UARTParity is the parity setting to be used for UART communication.